Pass your 352-001 exam in just 24 hours with killexams.

You require valid and upward up to right now 352-001 practice exam with Cheatsheet to complete Cisco 352-001 Exam. Practice these types of 352-001 free pdf to enhance your own knowledge and complete your examination along with High Marks. All of us ensure your achievement in 352-001 examination along with good marks, in case you remember these Practice Test and examcollection along with practice exam.

Exam Code: 352-001 Practice test 2022 by Killexams.com team
352-001 Cisco ADVDESIGN

Exam Name : CCDE Design Written Exam
Exam Number : 352-001 CCDE
Exam Duration : 120 minutes
Questions in test : 90-110
Passing Score : Variable (750-850 / 1000 Approx.)
Exam Registration : PEARSON VUE
Real Questions : Cisco 352-001 Real Questions
VCE practice test : Cisco Certified Design Expert Practice Test

Layer 2 Control Plane 24%
1 Describe fast convergence techniques and mechanisms
a) Down detection
b) Interface dampening 2 Describe loop detection and mitigation protocols
a) Spanning tree types
b) Spanning tree tuning techniques 3 Describe mechanisms that are available for creating loop-free topologies
a) REP
b) Multipath
c) Switch clustering
d) Flex links
e) Loop detection and mitigation
4 Describe the effect of transport mechanisms and their interaction with routing protocols over different types of links 5 Describe multicast routing concepts 6 Describe the effect of fault isolation and resiliency on network design
a) Fault isolation
b) Fate sharing
c) Redundancy
d) Virtualization
e) Segmentation
Layer 3 Control Plane 33%
1 Describe route aggregation concepts and techniques
a) Purpose of route aggregation
b) When to leak routes / avoid suboptimal routing
c) Determine aggregation location and techniques 2 Describe the theory and application of network topology layering
a) Layers and their purposes in various environments
3 Describe the theory and application of network topology abstraction
a) Purpose of link state topology summarization
b) Use of link state topology summarization 4 Describe the effect of fault isolation and resiliency on network design or network reliability
a) Fault isolation
b) Fate sharing
c) Redundancy
5 Describe metric-based traffic flow and modification
a) Metrics to modify traffic flow
b) Third-party next hop
6 Describe fast convergence techniques and mechanisms
a) Protocol timers
b) Loop-free alternates
7 Describe factors affecting convergence
a) Recursion
b) Microloops
c) Transport
8 Describe unicast routing protocol operation [OSPF, EIGRP, ISIS, BGP, and RIP] in relation to network design
a) Neighbor relationships
b) Loop-free paths
c) Flooding domains and stubs
d) iBGP scalability
9 Analyze operational costs and complexity
a) Routing policy
b) Redistribution methods
10 Describe the interaction between routing protocols and topologies
11 Describe generic routing and addressing concepts
a) Policy-based routing
b) NAT
c) Subnetting
d) RIB-FIB relationships
12 Describe multicast routing concepts
a) General multicast concepts
b) Source specific
c) MSDP/anycast
d) PIM
e) mVPN
13 Describe IPv6 concepts and operation
a) General IPv6 concepts
b) IPv6 security
c) IPv6 transition techniques
Network Virtualization 15%
1 Describe Layer 2 and Layer 3 tunnelling technologies
a) Tunnelling for security
b) Tunnelling for network extension
c) Tunnelling for resiliency
d) Tunnelling for protocol integration
e) Tunnelling for traffic optimization
2 Analyze the implementation of tunnelling
a) Tunnelling technology selection
b) Tunnelling endpoint selection
c) Tunnelling parameter optimization of end-user applications
d) Effects of tunnelling on routing
e) Routing protocol selection and tuning for tunnels
Design Considerations 18%
1 Analyze various QoS performance metrics
a) Application requirements
b) Performance metrics
2 Describe types of QoS techniques
a) Classification and marking
b) Shaping
c) Policing
d) Queuing
3 Identify QoS strategies based on customer requirements
a) DiffServ
b) IntServ
4 Identify network management requirements
5 Identify network application reporting requirements
6 Describe technologies, tools, and protocols that are used for network management
7 Describe the reference models and processes that are used in network management, such as FCAPS, ITIL®, and TOGAF
8 Describe best practices for protecting network infrastructure
a) Secure administrative access
b) Control plane protection
9 Describe best practices for protecting network services
a) Deep packet inspection
b) Data plane protection
10 Describe tools and technologies for identity management
11 Describe tools and technologies for IEEE 802.11 wireless deployment
12 Describe tools and technologies for optical deployment
13 Describe tools and technologies for SAN fabric deployment
Evolving Technologies v1.1 10%
1 Cloud
a) Compare and contrast public, private, hybrid, and multicloud design considerations
a) [i] Infrastructure, platform, and software as a service (XaaS)
a) [ii] Performance, scalability, and high availability
a) [iii] Security implications, compliance, and policy
[iv] Workload migration
b) Describe cloud infrastructure and operations
b) [i] Compute virtualization (containers and virtual machines)
b) [ii] Connectivity (virtual switches, SD-WAN and SD-Access)
c) [iii] Virtualization functions (NFVi, VNF, and L4/L6)
d) [iv] Automation and orchestration tools (CloudCenter, Cisco DNA-center, and Kubernetes)
2 Network programmability (SDN)
a) Describe architectural and operational considerations for a programmable network
a) [i] Data models and structures (YANG, JSON and XML)
a) [ii] Controller based network design (policy driven configuration and northbound/ southbound APIs)
a) [iii] Configuration management tools (agent and agentless) and version control systems (Git and SVN)
a) [iv] Device programmability (gRPC, NETCONF and RESTCONF) 3 Internet of things (IoT)
a) Describe architectural framework and deployment considerations for IoT
a) [i] IoT technology stack (IoT Network Hierarchy, data acquisition and flow)
b) [ii] IoT standards and protocols (characteristics within IT and OT environment)
c) [iii] IoT security (network segmentation, device profiling, and secure remote)

Cisco ADVDESIGN
Cisco test
Killexams : Cisco test - BingNews http://www.bing.com:80/news/search?q=Cisco+test&cc=us&format=RSS Search results Killexams : Cisco test - BingNews http://www.bing.com:80/news/search?q=Cisco+test&cc=us&format=RSS https://killexams.com/exam_list/Cisco Killexams : Preparing 200-301 test With Cisco 200-301 Dumps – DumpsCafe

You can demand BrainDumps for a full discount in the event that refreshed https://www.dumpscafe.com/Cisco-exams.html Dumps don’t assist you with getting the Cisco Certified Network Associate 200-301 confirmation test passing score. obtain the free demo of prepaway Cisco Certified Network Associate test 200-301 genuine dumps before you pay us.

A free demo of 200-301 CCNA PDF dumps and practice questions assists with eliminating disarray about our item. After purchasing BrainDumps from DumpsCafe 200-301 and refreshed test dumps, you get free 200-301 test questions refreshes.

DumpsCafe will offer these updates assuming that the CCNA 200-301 affirmation test schedule changes in the span of 90 days of your Cisco Certified Network Associate test substantial dumps buy. Good luck!

The online Cisco Certified Network Associate 200-301 practice test recreates the Cisco Certified Network Associate 200-301 genuine affirmation test without introducing any extra programming. The CCNA 200-301 online practice test records your set of experiences and promptly lets you know blunders in the readiness.

Thus, you can focus on more fragile ideas in your Cisco 200-301 test readiness. The CCNA 200-301 electronic practice test assists you with endeavoring the genuine 200-301 confirmation test with an exhaustive information on all test spaces.

200-301 practice test inquiries in the electronic 200-301 CCNA test mock test are like the real test questions. You can take the Cisco Certified Network Associate test 200-301 electronic practice test on Mac, Windows, iOS, Linux, and Android working frameworks. The online Cisco 200-301 self-evaluation test is viable with Safari, Internet Explorer, Chrome, and Opera.

  • Real Cisco Certified Network Associate 200-301 test questions alone can’t assist you with breezing through the CCNA 200-301 test. Testing abilities before the genuine Cisco 200-301 accreditation test is likewise crucial for break the CCNA 200-301 affirmation test on the primary attempt.
  • To assist you with surveying your readiness, DumpsCafe offers Windows-based 200-301 practice test programming that gives 200-301 genuine accreditation test climate. The genuine test climate that the 200-301 CCNA work area practice test gives assists you with finding out about the Cisco Certified Network Associate test 200-301 genuine test questions types and example.
  • The genuine Cisco 200-301 test reproduction assists you with wiping out tension about the real confirmation test. The Cisco Certified Network Associate practice test programming tracks and reports your endeavors.
  • Prompt Cisco Certified Network Associate 200-301 practice test results help you distinguish and defeat blunders in test arrangement. You can introduce the product and take the 200-301 practice test programming on all Windows-based workstations and PCs.

Cisco Certified Network Associate 200-301 refreshed test inquiries of prepaway are accessible in the simple to-utilize Cisco Certified Network Associate 200-301 PDF record.

This organization is helpful for fast 200-301 CCNA test planning.

These PDF CCNA 200-301 test questions are as indicated by the ongoing test design. Test candidates experience the real CCNA 200-301 confirmation test situation with PDF questions. Our experts consistently update inquiries in the 200-301 PDF design.

Along these lines, we keep our Cisco CCNA 200-301 PDF Questions significant with the real 200-301 CCNA affirmation test schedule. You can undoubtedly obtain and concentrate on Cisco Certified Network Associate test 200-301 inquiries PDF on workstations, cell phones, and tablets.

The similarity of 200-301 PDF dumps with shrewd gadgets helps change or retain Cisco Certified Network Associate 200-301 genuine inquiries without general setting limits.

Everyone in the IT field realizes that Cisco Certified Network Associate certificate takes a great deal of difficult work. Extensive information from exact CCNA 200-301 dumps is important to go through this troublesome Cisco Certified Network Associate 200-301 affirmation test. DumpsCafe gives Cisco 200-301 test candidates a refreshed review material in work area Cisco Certified Network Associate 200-301 practice test programming, electronic practice test, and Cisco Certified Network Associate 200-301 PDF design.

Certsout CCNA 200-301 test readiness material in three organizations guarantees Cisco 200-301 test candidates a smooth planning. The training test programming is viable with Windows-based PCs.

The electronic CCNA 200-301 self-evaluation test requires no product establishment. The 200-301 practice trial of DumpsCafe have comparative details. Also, our day in and day out client care group ceaselessly directs you on account of issues while utilizing exact Cisco 200-301 CCNA test Dumps. You can in a split second obtain DumpsCafe 200-301 CCNA test questions just after the installment.

Fri, 01 Jul 2022 03:00:00 -0500 en-US text/html https://signalscv.com/2022/07/preparing-200-301-exam-with-cisco-200-301-dumps-dumpscafe/
Killexams : Cisco Certification Guide: Overview and Career Paths

Cisco Systems Inc. specializes in networking and communications products and services. The company is probably best known for its business routing and switching products, which direct data, voice, and video traffic across networks around the world. However, Cisco also offers storage networking, applications for unified communications, telepresence and collaboration (WebEx), and an array of services from simple product support to complete solutions for data centers and cloud management.

To ensure that IT professionals have the skills and knowledge necessary to support Cisco products and solve customers’ technology problems on many fronts, the Cisco Career Certification program is all-embracing. That is, it begins at the entry level, then advances to associate, professional, and expert levels, and (in some certification areas) caps things off at the architect level.

Each level offers one or more credentials. Obtaining a credential usually involves passing one or more certification exams. Most Cisco exams are delivered by Pearson VUE. For higher-level credentials, candidates must also prove they meet necessary prerequisites. The higher the level of certification, the more credentials and prerequisites one needs to meet those requirements.

Cisco certification program overview

Certifications within Cisco’s portfolio include the following credentials:

  • Cisco Certified Entry Networking Technician (CCENT)
  • Cisco Certified Technician (CCT)
  • Cisco Certified Network Associate (CCNA)
  • Cisco Certified Design Associate (CCDA)
  • Cisco Certified Network Professional (CCNP)
  • Cisco Certified Design Professional (CCDP)
  • Cisco Certified Internetwork Expert (CCIE)
  • Cisco Certified Design Expert (CCDE)
  • Cisco Certified Architect (CCAr)

There are many certifications and paths one can take in Cisco’s career program. That said, its two main paths cover network operation and network design. A typical Cisco networking certification ladder begins with the entry-level CCENT credential, moves up to the CCNA, onto the CCNP and culminates with the CCIE. The design-oriented might instead consider starting with the CCENT, moving up to the CCDA, then the professional-level CCDP, followed by the CCDE, and finish the program with the CCAr.

The Cisco Career Certification program also includes a number of specializations. These certifications acknowledge a professional’s skills in a specific Cisco technology, such as data center application services, voicemail and messaging or rich media. Cisco specializations are organized into two primary categories: one targeting technical specialists and another targeting digital transformation specialists. Between these two categories, there are currently 15 specializations among which IT pros can choose.

The Technical Specialist category includes specializations across six subcategories:

  • Collaboration
  • Data Center (FlexPod)
  • Network Programmability
  • Operating System Software
  • Service Provider
  • Internet of things (IoT)

Digital Transformation specialists includes credentials geared to Business Architecture and Customer Success.

Achieving a specialist credential generally requires passing one or two exams. Some credentials also impose prerequisites.

Entry-, associate- and professional-level credentials are valid for three years, CCIE and specialist certifications are valid for two years and the CCAr is valid for five years. To keep certifications current, Cisco professionals need to recertify by passing a recertification test or advancing to a higher level in Cisco’s certification hierarchy.

Cisco’s entry-level certifications

Cisco has two entry-level credentials: the Cisco Certified Entry Networking Technician (CCENT) and the Cisco Certified Technician (CCT). No prerequisites are needed to obtain either the CCENT or CCT credential, and candidates must pass a single test to earn each credential.

CCENT certified professionals install, maintain and troubleshoot small networks or a branch of an enterprise network, and implement basic network security. The CCENT credential is a prerequisite for some associate-level CCNA solution track credentials and the CCDA.

CCTs work onsite at customer locations, diagnosing issues and repairing or replacing network-related equipment. A CCT can choose one of several specialty tracks, which currently includes Data Center and Routing and Switching.

Certification

Exams

Number of Questions

Time to Complete

CCENT

100-105 ICND1

45-55

90 minutes

CCT Data Center

010-151 DCTECH

65-75

90 minutes

CCT Routing & Switching

640-692 RSTECH

60-70

90 minutes

Cisco’s associate-Level Certifications

Cisco’s associate-level certifications include the Cisco Certified Network Associate (CCNA) and the Cisco Certified Design Associate (CCDA). One must pass one or two certification exams to achieve a CCNA or CCDA credential, depending on the track you choose.

The CCNA recognizes basic skills in installing, supporting, and troubleshooting wired and/or wireless networks. One can choose from several tracks, including Cloud, Collaboration, Cyber Ops, Data Center, Industrial, Routing and Switching, Security, Service Provider and Wireless. The CCNA is a prerequisite for the professional-level CCNP certification. Prerequisites for the CCNA vary depending on the solution track chosen as do the number of required exams. All solution tracks require either one or two exams.

Cisco created the CCDA to identify individuals who can design basic wired and wireless networks, and incorporate security and voice solutions. The CCDA is a prerequisite for the CCDP certification. To obtain the CCDA, candidates must possess either a valid CCENT, CCNA Routing and Switching (or any CCIE certification), and pass a single additional exam.

Certification

Exams

Number of Questions

Time to Complete

CCDA

200-310 DESGN

55-65

75 minutes

CCNA Cloud

210-451 CLDFND

55-65

90 minutes

210-455 CLDADM

55-65

90 minutes

CCNA Collaboration

210-060 CICD

55-65

75 minutes

210-065 CIVND

55-65

75 minutes

CCNA Cyber Ops

210-250 SECFND

55-60

90 minutes

210-255 SECOPS

60-70

90 minutes

CCNA Data Center

200-150 DCICN

55-65

90 minutes

200-155 DCICT

65-75

120 minutes

CCNA Industrial

200-601 IMINS2

65-75

90 minutes

CCNA Routing and Switching**

200-125 CCNA

60-70

90 minutes

100-105 ICND1

45-55

90 minutes

200-105 ICND2

55-65

90 minutes

CCNA Security

210-260 IINS

60-70

90 minutes

CCNA Service Provider

640-875 SPNGN1

65-75

90 minutes

640-878 SPNGN2

65-75

90 minutes

CCNA Wireless

200-355 WIFUND

60-70

90 minutes

**Candidates for the CCNA Routing and Switching may take test 200-125 OR test 100-105 plus 200-105.

Cisco’s professional-level certifications

Cisco’s professional-level credentials include two main programs: the Cisco Certified Network Professional (CCNP) and the Cisco Certified Design Professional (CCDP). To obtain the CCDP, one must pass three certification exams and possess both the CCDA and CCNA Routing and Switching credentials or any Cisco CCIE or CCDE certification.

All CCNP solution tracks, except Routing and Switching, require candidates to pass four exams. Only three exams are required for the CCNP: Routing and Switching credential. Prerequisites for all CCNP solution tracks include either the lower-level CCNA credential or any CCIE credential. The CCNP: Service Provider credential also accepts the Cisco Certified Internet Professional (CCIP) credential as a prerequisite (which retired in 2012).

The CCNP credential recognizes professionals who plan, deploy, and troubleshoot local networks and wide area networks. The CCNP tracks are the same as those for the CCNA, except for Industrial and Cyber Ops, which are not offered in the CCNP track. The CCNP is recommended to climb up to the next step on the cert ladder – the Cisco Certified Internetwork Expert.

The CCDP identifies proficiency in designing and deploying scalable networks and multilayer-switched networks. From the CCDP, you can move on to the Cisco Certified Design Expert.

Certification

Exams

Number of Questions

Time to Complete

CCDP

300-101 ROUTE

45-65

120 minutes

300-115 SWITCH

30-40

120 minutes

300-320 ARCH

60-70

75 minutes

CCNP Cloud

300-460 CLDINF

55-65

90 minutes

300-465 CLDDES

55-65

90 minutes

300-470 CLDAUT

55-65

90 minutes

300-475 CLDACI

55-65

90 minutes

CCNP Collaboration

300-070 CIPTV1

65-75

75 minutes

300-075 CIPTV2

50-60

75 minutes

300-080 CTCOLLAB

55-65

75 minutes

300-085 CAPPS

55-65

75 minutes

CCNP Data Center**

300-175 DCUCI

55-65

90 minutes

300-165 DCII

55-65

90 minutes

300-170 DCVAI

55-65

90 minutes

300-160 DCID

55-65

90 minutes

300-180 DCIT

70-80

90 minutes

CCNP Routing and Switching

300-101 ROUTE

45-65

120 minutes

300-115 SWITCH

30-40

120 minutes

300-135 TSHOOT

15-25

120 minutes

CCNP Security

300-208 SISAS

55-65

90 minutes

300-206 SENSS

65-75

90 minutes

300-209 SIMOS

65-75

90 minutes

300-210 SITCS

65-75

90 minutes

CCNP Service Provider

642-883 SPROUTE

65-75

90 minutes

642-885 SPADVROUTE

65-75

90 minutes

642-887 SPCORE

65-75

90 minutes

642-889 SPEDGE

65-75

90 minutes

CCNP Wireless

300-360 WIDESIGN

55-65

90 minutes

300-365 WIDEPLOY

55-65

90 minutes

300-370 WITSHOOT

55-65

90 minutes

300-375 WISECURE

55-65

90 minutes

**CCNP Data Center may take either the 300-160 or 300-180 exam.

Cisco’s expert-level certifications

Cisco’s expert-level credentials embrace two primary certifications: the coveted Cisco Certified Internetwork Expert (CCIE) and the Cisco Certified Design Expert (CCDE). Neither certification imposes prerequisites, but one must pass a written test and a rigorous practical test to earn either of these credentials.

Beginning in July 2016, Cisco updated its expert-level exams to include an evolving technologies domain. This new domain targets cloud, network programmability and the IoT, and it accounts for 10 percent of the total test score. Cisco may change the Topics included in this domain to reflect emerging technologies as they reach strong enough commercial interest, potential and presence to make them examworthy. The company describes this mechanism as a way to help future-proof its certifications so that employers may assume that those who hold current credentials are also up to speed on important new networking technologies.

For many network-track professionals, achieving the CCIE is the highlight of their careers. A CCIE has expert technical skills and knowledge of Cisco network products and solutions in one of the CCIE technical tracks, which currently include Collaboration, Data Center, Routing and Switching, Security, Service Provider, and Wireless.

The CCDE identifies experts who design infrastructure solutions for large enterprise environments, which include technological, operational, business and budget aspects of a project.

Cisco’s architect-level certifications

For persons seeking positions such as network architect or data center architect, a smart move is to acquire the Cisco Certified Architect (CCAr) certification. The CCAr is like the Ph.D. of the Cisco Career Certification program – it’s the highest level of certification that Cisco offers. This credential validates the skills of a senior network infrastructure architect, someone who can plan and design IT infrastructures based on business strategies. Many people consider the CCAr the most difficult tech certification to achieve.

To earn the CCDE certification, you must design a network solution to implement an assigned strategy; then, you must appear before a Cisco-appointed panel to explain and defend that solution.

Whether you’re following a network operations or network design career path, Cisco certifications are uniquely positioned to assist IT professionals as they prepare to fulfill various Cisco-related career roles. Regardless of your chosen career path, job opportunities are plentiful for skilled Cisco professionals. A simple search for Cisco CCNA professionals on two popular job boards – SimplyHired and Indeed – yielded between 7,500 and 9,500 job postings each.

Job opportunities vary by factors, such as experience and whether you’re focused on network operations or network design. While certainly not exhaustive, the following list identifies some common job opportunities by certification:

  • CCENT: Help desk or technician roles
  • CCT: Engineer (field, network, application support) or systems administrator
  • CCNA: Engineer (network, telecommunications), technician (network, network operations) or analyst (network, network operations center)
  • CCDA: Engineer (network, system, design, lead), analyst (interface), interface developer or technical specialist
  • CCNP: Network administrator, engineer (support, network) or advanced technician, as well as senior-level roles
  • CCDP: Senior-level roles; senior network design engineer, senior analyst, cyber protection analyst or network designer
  • CCIE: Expert-level roles; network architect, engineer (lead, systems, network) or senior network administrator
  • CCDE: Expert-level roles; systems engineer, senior network engineer, network architect, network design engineer or IT infrastructure team lead
  • CCAr: Architect (lead, network, enterprise, voice data and more)

Training and Resources

Cisco maintains a comprehensive list of training and self-study resources. These resources include various forms of online learning, practice exams, learning labs, links to which appear on each certification’s web page. The Cisco Learning Network offers candidates a free basic membership that includes access to test topics, live seminars, IT training videos, study groups, forums, study materials and much more. The subscription-based Cisco Platinum Learning Library provides professionals with on-demand learning and access to more than 400 courses, hands-on vLabs, the support library, and more. Additional training materials are also available from Cisco Press.

Tue, 28 Jun 2022 12:00:00 -0500 en text/html https://www.businessnewsdaily.com/10700-cisco-certification-guide.html
Killexams : Last day to get extensive CompTIA, AWS, and Cisco training for only $25

What do Netflix, Twitch, LinkedIn, and Facebook have in common? Aside from luring you to spend hours and hours on their site, these hotshot tech companies are known to use AWS or Amazon Web Services

They rely on AWS for nearly all their computing and storage needs, including analytics, databases, recommendation engines, and more. Many other companies, regardless of size, also use AWS to run their online operations, which means there are plenty of individuals manning the job. In the tech industry, AWS and cloud computing experts are extremely in demand, and you can capitalize on the demand with the help of The 2022 CompTIA and AWS, Cisco Certification Paths Bundle: Lifetime Access, which not only offers AWS training, but also IT and networking courses, particularly CompTIA and Cisco certification. You can get it at a special Deals Day price until July 14.

Taught by CramWise, a privately held company specializing in providing robust examination preparation materials used by individuals around the world, this course bundle help students prepare for Cisco, AWS, CompTIA and certification exams via comprehensive test simulations. This highly-rated, premier test delivery system enables students to test their knowledge and gain confidence before taking the real exam. This way, they can go in with confidence knowing they can answer the questions, and come out passing with flying colors. 

The courses included in this bundle cover a wide range of topics, from cloud computing to network administration. It packs over 30 hours of expert-led content for various certification paths, including CompTIA A+ Core, AWS Solutions Architect, and CISCO CCNA. 

With purchase, you get lifetime access to all courses, meaning you can go through them at your own pace, at your own time, using any device.

The 2022 CompTIA and AWS, Cisco Certification Paths Bundle: Lifetime Access usually goes for $449, but you can get it on sale for $24.99 until July 14.

Prices subject to change.

Thu, 14 Jul 2022 02:21:00 -0500 Stack Commerce en-US text/html https://www.popsci.com/gear/aws-cisco-comptia-sale/
Killexams : Best Data Center Certifications

Job board search results (in alphabetical order, by certification)*

Certification

SimplyHired

Indeed

LinkedIn Jobs

LinkUp

Total

CCNA Data Center (Cisco)

1,564 2,126 1,649 19 3,876

CCNP Data Center (Cisco)

1,025 1,339 1,508 14 3,145

JNCIP-DC (Juniper Networks)

125 37 14 4 130

VCE-CIAE (Dell)*

81 19 30 14 132

VCP6-DCV (VMware)

32 37 57 38 111

*Search results for the generic phrase “VCE data center engineer”

Regardless of which job board you use, you’ll find many employers looking for qualified people to join their data center teams. SimplyHired lists 114,000-plus data center jobs in the U.S., with more than 172,000 on Indeed, 50,000 on LinkedIn Jobs and 20,000 on LinkUp. With the right credential(s) in hand, one of these jobs is sure to be yours.

Data center job roles start at the network technician level and advance through senior architect. Most of the certifications covered would fit well with an associate- or professional-level network engineer position. According to SimplyHired, the average salary for network engineer jobs is about $79,000, and $111,000 for senior network engineers. Glassdoor reports a U.S. national average salary of about $73,000 for network engineers, and their average for senior network engineers climbs to $94,000.

Cisco Certified Network Associate (CCNA) Data Center

Cisco certifications continue to be some of the most recognizable and respected credentials in the industry. The CCNA Data Center certification is a great introductory certification for networking professionals who want to specialize in data center operations and support and have 1-3 years of experience.

Candidates for the CCNA Data Center certification need to understand basic data center networking concepts. These include addressing schemes, troubleshooting and configuring switches with VLANs and routers using Nexus OS, network and server virtualization, storage, and common network services such as load balancing, device management and network access controls.

The CCNA Data Center is valid for three years, after which credential holders must recertify. Recertification requires passing a current version of one of the following exams:

  • Associate-level test (except for ICND1 exam)
  • 642-XXX professional-level or 300-XXX professional-level exam
  • 642-XXX Cisco Specialist test (does not include Sales Specialist exams or MeetingPlace Specialist exams, Implementing Cisco TelePresence Installations (ITI) exams, Cisco Leading Virtual Classroom Instruction exams, or any 650 online exams)
  • Cisco Certified Internetwork Expert (CCIE) written exam
  • Cisco Certified Design Expert (CCDE) written test or current CCDE practical exam

Candidates can also sit through the Cisco Certified Architect (CCAr) interview and the CCAr board review to achieve recertification for CCNA Data Center.

CCNA Data Center facts and figures

Cisco Certified Network Professional (CCNP) Data Center

Networking professionals looking to validate their data center skills and achieve a competitive edge in the workplace can’t go wrong with the Cisco Certified Network Professional (CCNP) Data Center credential.

Geared toward technology architects, along with design and implementation engineers and solutions experts, the CCNP Data Center identifies individuals who can implement Cisco Unified Computing System (UCS) rack-mount servers; install, configure and manage Cisco Nexus switches; and implement and deploy automation of Cisco Application Centric Infrastructure (ACI). The CCNP Data Center is designed for candidates with 3-5 years of experience working with Cisco technologies.

When pursuing the CCNP Data Center, Cisco lets you choose either a design or troubleshooting track. Related data center certifications include the Cisco Certified Network Associate (CCNA Data Center), for those with 1-3 years of experience, and the Cisco Certified Internetwork Expert (CCIE) Data Center, aimed at professionals with seven or more years of experience.

The CCNP Data Center is valid for three years, after which credential holders must recertify. The recertification process requires candidates to pass a single test to maintain the credential, or to sit for the Cisco Certified Architect (CCAr) interview and the CCAr board review. Credential holders should check the Cisco website for the current list of qualifying exams before attempting to recertify.

CCNP Data Center facts and figures

Certification name

Cisco Certified Network Professional Data Center (CCNP Data Center)

Prerequisites and required courses

Valid Cisco Certified Network Associate Data Center (CCNA Data Center) certification or any Cisco Certified Internetwork Expert (CCIE) certification. Training recommended but not required; classes are usually four or five days and start at $3,950.

Number of exams

Four exams:
  • 300-175 DCUCI – Implementing Cisco Data Center Unified Computing
  • 300-165 DCII – Implementing Cisco Data Center Infrastructure
  • 300-170 DCVAI – Implementing Cisco Data Center Virtualization and Automation
    AND
  • 300-160 DCID – Designing Cisco Data Center Infrastructure
    OR
  • 300-180 DCIT –  Troubleshooting Cisco Data Center Infrastructure

All exams are 90 minutes, 60-70 questions.

Cost per exam

$300 per exam; $1,200 total (price may vary by region). Exams administered by Pearson VUE.

URL

http://www.cisco.com/c/en/us/training-events/training-certifications/certifications/professional/ccnp-data-center.html

Self-study materials

The certification page provides links to self-study materials, including the syllabus, study groups, webinars, Cisco Learning Network resources and learning partner content.

JNCIP-DC: Juniper Networks Certified Professional Data Center

Juniper Networks, based in California and incorporated in 1997, develops and sells network infrastructure equipment and software aimed at corporations, network service providers, government agencies and educational institutions. The company has a large certification and training program designed to support its solutions, which includes Data Center, Junos Security, Enterprise Routing and Switching, and Service Provider Routing and Switching tracks.

The Data Center track recognizes networking professionals who deploy, manage and troubleshoot Juniper Networks Junos software and data center equipment. The single test (JN0-680) covers data center deployment and management, including implementation and maintenance of multi-chassis link aggregation group (LAG), virtual chassis and Internet Protocol (IP) fabric, virtual extensible LANs (VXLANs), and data center interconnections.

The JNCIP-DC certification is good for three years. To renew the certification, candidates must pass the current JNCIP-DC exam.

JNCIP-DC facts and figures

VCE-CIAE: VCE Converged Infrastructure Administration Engineer

VCE, short for Virtual Computing Environment, was part of EMC Corporation, which Dell acquired in 2016. The VCE line of converged infrastructure appliances are still being manufactured and widely sold, and the company has a handful of VCE certifications geared toward designing, maintaining and supporting those solutions.

VCE certifications are now part of the larger Dell EMC Proven Professional certification program but have retained some independence. The program currently offers the VCE Certified Converged Infrastructure Associate (VCE-CIA), VCE Converged Infrastructure Administration Engineer (VCE-CIAE) and VCE Converged Infrastructure Master Administration Engineer (VCE-CIMAE) credentials. We focus on the VCE Administration Engineer in this article because it’s available to the public as well as Dell employees and partners, and it ranks well in job board searches.

The VCE-CIAE is a professional-level credential that recognizes professionals who manage and support Vblock Systems. The single test includes Topics such as system concepts, administration, security, resource management, maintenance and troubleshooting.

Candidates must recertify every two years to maintain a VCE certification. To renew, credential holders must pass the current VCE-CIA test (this is the prerequisite for the VCE-CIAE certification), as well as pass the current VCE-CIAE test or earn a higher-level credential.

VCE-CIAE facts and figures

VCP6-DCV: VMware Certified Professional 6 – Data Center Virtualization

The VCP6-DCV is one of those credentials that sits firmly on the line between traditional data center networking and cloud management. As such, it appeals to a wide networking audience. In fact, the VMware website states that more than 100,000 professionals have earned VMware VCP6-DCV certification, making it one of the company’s most popular certifications.

VMware offers an extensive certification program with a rigorous Data Center virtualization track, which includes the VCP6-DCV. Candidates must thoroughly understand Domain Name System (DNS), routing and database connectivity techniques, and how to deploy, configure, manage and scale VMware vSphere environments and storage. VMware recommends that candidates have a minimum of six months of experience with VMware vSphere 6 before attempting the VCP6-DCV certification.

New candidates must take a VMware training course and pass two exams. Training courses start at $4,125; pricing is based on the specific course, delivery format and learning partner.

VMware requires credential holders to recertify every two years. Recertification is achieved by taking whatever test is most current for the certification, earning a new VCP certification in a different solution track or advancing to the next-level VMware certification.

Note: VMware certifications are geared toward the VMware vSphere product, the latest incarnation of which is Version 6.5. As of April 2019, VMware is still rolling out various Version 6.5 exams. Currently, Version 6.5 exams are offered for the Professional and Advanced Professional (Design only) levels. We anticipate that Version 6.5 exams and credentials at the Associate, Advanced Professional Deploy and Expert levels will follow soon.

VCP6-DCV facts and figures

Certification name

VMWare Certified Professional 6 – Data Center Virtualization (VCP6-DCV)

Prerequisites and required courses

Candidates who are new to VMware Data Center Virtualization technology: Six months’ vSphere 6 experience plus one of the following training courses:
  • VMware vSphere: Install, Configure, Manage [V6 or V6.5]
  • VMware vSphere: Optimize and Scale [V6 or V6.5]
  • VMware vSphere: Install, Configure, Manage plus Virtual SAN Fast Track [V6]
  • VMware vSphere: Optimize & Scale [V6 or V6.5]
  • VMware vSphere: Bootcamp [V6]
  • VMware vSphere: Fast Track [V6 or V6.5]
  • VMware vSphere: Design and Deploy Fast Track [V6]
  • VMware vSphere: Troubleshooting [V6]
  • VMware vSphere: Troubleshooting Workshop [V6.5]
  • VMware vSphere: Install, Configure and Manage plus Optimize and Scale Fast Track [V6 or V6.5]
  • VMware vSphere: Optimize and Scale plus Troubleshooting Fast Track [V6]

Note: The cost of VMware training varies; expect to pay from $4,125 for classroom training to more than $6,000 for Bootcamps and Fast Track courses.

Number of exams

Two exams for new candidates, those with vSphere 5 training only, those with an expired VCP in a different solution track or those with an expired VCP5-DCV certification:

One test for candidates with valid VCP5-DCV certification: VMware Certified Professional 6 – Data Center Virtualization Delta exam, 2V0-621D, 105 minutes, 65 questions

One test for candidates with valid VCP certification, any solution track: VMware Certified Professional 6 – Data Center

Exams administered by Pearson VUE.

Cost per exam

  • vSphere Foundations test (V6 or V6.5): $125
  • VMware Certified Professional 6 – Data Center Virtualization exam: $250
  • VMware Certified Professional 6 – Data Center Virtualization Delta exam: $250

URL

VCP6-DCV: https://mylearn.vmware.com/mgrReg/plan.cfm?plan=64178&ui=www_cert
VCP6.5-DCV: https://mylearn.vmware.com/mgrReg/plan.cfm?plan=100942&ui=www_cert

Self-study materials

Links to an test guide, training and a practice test (if available) appear on each test page (see the How to Prepare tab). VMware Learning Zone offers test prep subscriptions. Numerous VCP6-DCV study materials are available through Amazon. MeasureUp offers a VCP6-DCV practice test ($129) and a practice lab ($149).

Beyond the top 5: More data center certifications

While not featured in the top five this year, the BICSI Data Center Design Consultant (DCDC) is a terrific certification, designed for IT professionals with at least two years of experience in designing, planning and implementing data centers. This vendor-neutral certification is ideal for data center engineers, architects, designers and consultants. Another good vendor-neutral certification is Schneider Electric’s Data Center Certified Associate (DCCA), an entry-level credential for individuals who design, build and manage data centers as part of a data center-centric IT team.

CNet’s Certified Data Centre Management Professional (CDCMP) and Certified Data Centre Technician Professional (CDCTP) are also worthy of honorable mention. Based in the U.K., these certifications don’t appear in a lot of U.S. job board postings but still deliver solid results from a general Google search.

IT professionals who are serious about advancing their data center careers would do well to check out complementary certifications from our featured vendors. For example, Cisco also offers a number of certifications in data center design and support, including application services, networking infrastructure, storage networking and unified computing. VMware also offers additional data center virtualization certifications worth exploring, including the VMware Certified Advanced Professional 6.5 – Data Center Virtualization Design (VCAP6.5-DCV Design) and the VMware Certified Design Expert (VCDX6-DCV). Also, the Dell EMC Proven Professional certification program offers a bevy of data center-focused certifications, including the Dell EMC Implementation Engineer (EMCIE) and the Dell EMC Certified Cloud Architect (EMCCA).

Because of the proliferation of data center virtualization and cloud computing, you can expect the data center networking job market to continue to remain strong soon. Achieving a certification can be a real feather in your cap, opening the door to new and better work opportunities.

Tue, 28 Jun 2022 12:00:00 -0500 en text/html https://www.businessnewsdaily.com/10777-data-center-certifications.html
Killexams : Scisco grabs Wall Stadium Modified win on stormy Saturday

WALL TOWNSHIP — Beating the the field and evening rain showers that eventually postponed two feature races, Kyle Scisco powered to the victory in the 40-lap main event for Modified stock cars at Wall Stadium Speedway on July 16. It was the second win of the year for Jackson’s “Scisco Kid.”

Howell’s Eric Lane was the early leader of the test as he fought off challenges by Ricky Collins of Willow Grove, Pa., and Jackson’s Steven Reed in the early going, according to a press release.

Meanwhile Scisco was slicing his way through the field and arrived in the top five just before the halfway mark. Scisco was third by lap 25, second on lap 33 and then raced into the lead after racing side-by-side with Lane to take the lead and eventually the win.

Lane was an impressive second at the stripe, while points leader Andrew Krause of Holmdel raced through the pack for third. Tyler Truex of Egg Harbor Township and Jackson’s Blake Barney completed the top five.

“We seemed to be getting knocked around back in the pack in the beginning,” Scisco said. “So I tried to get to the front quickly. I have to thank Steve Ferrara and the team for such a great car. I also want everyone to know our sponsor Link Belt is backing the ‘Digging for a Cure’ campaign against breast cancer. Our team is donating all the money we made tonight toward that goal.”

Mike Alcaro of Milford won his second straight race, this time in a different car, in the Legend Cars 20-lap main event. Tanner Jones, Nick Morabito, Brian Gardella and Peter Bruno completed the top five.

Alonzo Morales of Burlington was tops in the 25-lap feature for the Fast 4 racers. Ryan Maher, Sean Vuksanic, early leader Alex Graetz and Logan Fraser were second through fifth.

Howie Conk of Freehold topped the 25-lap feature for the Limited Late Models after battling for the lead with Rob Ormsbee. Mike Tillett, Ray Minieri, Geoff Handel and James Moorman wrapped up the top five.

The scheduled 50-lap race for the Sportsman cars and the Factory Stock 25-lap feature were postponed by rain, according to the press release.

Saturday night racing action continues on July 23 with the Modifieds headlining in the “Summer Thunder 100.” Factory Stocks, Fast 4’s and Legend Cars are also on the schedule, with qualifying at 5 p.m. and the main events at 7 p.m. For more information, visit wallspeedwayracing.com

Mon, 18 Jul 2022 00:50:00 -0500 en-US text/html https://centraljersey.com/2022/07/18/scisco-grabs-wall-stadium-modified-win-on-stormy-saturday/
Killexams : Prepare for a Career in IT With This Discounted Certification Bundle

As an IT professional, understanding multiple technologies is crucial to keep your skill set relevant. One way to prepare is with The 2022 CompTIA & AWS, Cisco Certification Paths Bundle, available now for 94% off the list price.

The bundle, presented by e-learning course provider CramWise, features 30 hours of test prep for 13 different certification paths in the CompTIA, AWS, and Cisco families. What sets this course package apart, though, is its entry-level material. If you want a well-rounded education, the CompTIA A+ 220-1001 and 220-1002 lessons should help; those interested in vendor-specific technology can tap into content for Cisco's entry-level CCNA certification. Finally, you'll find CLF-C01 training for AWS Certified Cloud Practitioner, one of Amazon's foundational certs.

From there, you'll progress to CompTIA or Amazon's higher-level training. CompTIA, being vendor-neutral, offers certifications for a wide range of uses, from cybersecurity to virtualization. The bundle's remaining AWS lesson options, meanwhile, cover associate-level designations aimed toward IT professionals with at least one year of work experience.

Validate your IT portfolio and prepare for certification with 30 hours of training. PCMag readers can get lifetime access to The 2022 CompTIA & AWS, Cisco Certification Paths Bundle for $24.99—$424.01 off the $449 MSRP.

Prices subject to change.

Looking for a Deal?

Sign up for our expertly curated Daily Deals newsletter for the best bargains you’ll find anywhere.

This newsletter may contain advertising, deals, or affiliate links. Subscribing to a newsletter indicates your consent to our Terms of Use and Privacy Policy. You may unsubscribe from the newsletters at any time.

Wed, 13 Jul 2022 02:07:00 -0500 en text/html https://www.pcmag.com/deals/prepare-for-a-career-in-it-with-this-discounted-certification-bundle
Killexams : Florida man busted, sold $1 billion worth of fake Cisco hardware

A federal grand jury has indicted a Florida man who, where over the last 8 years, had been selling fake Cisco hardware and pulled in over $1 billion from government agencies, hospitals, schools, and... even the military.

VIEW GALLERY - 2 IMAGES

Onur Aksoy, aka Ron Aksoy, aka Dave Durden, was busted selling fake Cisco equipment from suppliers in both China and Hong Kong, importing tens of thousands of products from 2014 to 2022. The US Department of Justice says that he had at least 19 companies in New Jersey and Florida, at least 15 Amazon storefronts, at least eBay storefronts, and multiple other entities that collectively, are called the "Pro Network Entities".

The US Department of Justice explains that the man "imported tens of thousands of fraudulent and counterfeit Cisco networking devices from China and Hong Kong and resold them to customers in the United States and overseas, falsely representing the products as new and genuine. The operation allegedly generated over $100 million in revenue, and Aksoy received millions of dollars for his personal gain".

It wasn't a small operation, but you aren't going to pull in over $1 billion without making it look good... where Onur Aksoy, aka Ron Aksoy, aka Dave Durden imported older, lower-model products that included models that had Chinese counterfeiters that modified them to APPEAR to be genuine versions of new, enhanced, higher-end Cisco products.

The Chinese counterfeiters added pirated Cisco software, and unauthorized, low-quality, or unreliable components -- which the US DOJ adds that included "components to circumvent technological measures added by Cisco to the software to check for software license compliance and to authenticate the hardware. This made the devices look like brand new, genuine, high-quality, and factory-sealed by Cisco... naughty, naughty.

The fraudulent and counterfeit products saw Chinese counterfeiters adding counterfeited Cisco labels, stickers, boxes, documentation, packaging, and other materials.

Cisco even sent Aksoy letters between 2014 and 2019, with 7 letters where Cisco asked him to cease and desist his trafficking of counterfeit goods. Aksoy allegedly responded to at least two of these letters by causing his attorney to provide Cisco with forged documents. In July 2021, agents executed a search warrant at Aksoy's warehouse and seized 1,156 counterfeit Cisco devices with a retail value of over $7 million

Mon, 11 Jul 2022 13:31:00 -0500 en-US text/html https://www.tweaktown.com/news/87310/florida-man-busted-sold-1-billion-worth-of-fake-cisco-hardware/index.html
Killexams : Cisco Systems, Inc. (NASDAQ:CSCO) Stock's Been Sliding But Fundamentals Look Decent: Will The Market Correct The Share Price In The Future?

Cisco Systems (NASDAQ:CSCO) has had a rough three months with its share price down 18%. But if you pay close attention, you might find that its key financial indicators look quite decent, which could mean that the stock could potentially rise in the long-term given how markets usually reward more resilient long-term fundamentals. In this article, we decided to focus on Cisco Systems' ROE.

Return on Equity or ROE is a test of how effectively a company is growing its value and managing investors’ money. In short, ROE shows the profit each dollar generates with respect to its shareholder investments.

See our latest analysis for Cisco Systems

How Is ROE Calculated?

ROE can be calculated by using the formula:

Return on Equity = Net Profit (from continuing operations) ÷ Shareholders' Equity

So, based on the above formula, the ROE for Cisco Systems is:

30% = US$12b ÷ US$40b (Based on the trailing twelve months to April 2022).

The 'return' is the profit over the last twelve months. Another way to think of that is that for every $1 worth of equity, the company was able to earn $0.30 in profit.

What Is The Relationship Between ROE And Earnings Growth?

We have already established that ROE serves as an efficient profit-generating gauge for a company's future earnings. We now need to evaluate how much profit the company reinvests or "retains" for future growth which then gives us an idea about the growth potential of the company. Assuming everything else remains unchanged, the higher the ROE and profit retention, the higher the growth rate of a company compared to companies that don't necessarily bear these characteristics.

A Side By Side comparison of Cisco Systems' Earnings Growth And 30% ROE

First thing first, we like that Cisco Systems has an impressive ROE. Second, a comparison with the average ROE reported by the industry of 14% also doesn't go unnoticed by us. This probably laid the groundwork for Cisco Systems' moderate 16% net income growth seen over the past five years.

As a next step, we compared Cisco Systems' net income growth with the industry and were disappointed to see that the company's growth is lower than the industry average growth of 22% in the same period.

past-earnings-growth

Earnings growth is an important metric to consider when valuing a stock. It’s important for an investor to know whether the market has priced in the company's expected earnings growth (or decline). This then helps them determine if the stock is placed for a bright or bleak future. Is Cisco Systems fairly valued compared to other companies? These 3 valuation measures might help you decide.

Is Cisco Systems Using Its Retained Earnings Effectively?

The high three-year median payout ratio of 54% (or a retention ratio of 46%) for Cisco Systems suggests that the company's growth wasn't really hampered despite it returning most of its income to its shareholders.

Besides, Cisco Systems has been paying dividends for at least ten years or more. This shows that the company is committed to sharing profits with its shareholders. Our latest analyst data shows that the future payout ratio of the company is expected to drop to 39% over the next three years. Despite the lower expected payout ratio, the company's ROE is not expected to change by much.

Conclusion

Overall, we feel that Cisco Systems certainly does have some positive factors to consider. Its earnings have grown respectably as we saw earlier, which was likely due to the company reinvesting its earnings at a pretty high rate of return. However, given the high ROE, we do think that the company is reinvesting a small portion of its profits. This could likely be preventing the company from growing to its full extent. That being so, a study of the latest analyst forecasts show that the company is expected to see a slowdown in its future earnings growth. Are these analysts expectations based on the broad expectations for the industry, or on the company's fundamentals? Click here to be taken to our analyst's forecasts page for the company.

Have feedback on this article? Concerned about the content? Get in touch with us directly. Alternatively, email editorial-team (at) simplywallst.com.

This article by Simply Wall St is general in nature. We provide commentary based on historical data and analyst forecasts only using an unbiased methodology and our articles are not intended to be financial advice. It does not constitute a recommendation to buy or sell any stock, and does not take account of your objectives, or your financial situation. We aim to bring you long-term focused analysis driven by fundamental data. Note that our analysis may not factor in the latest price-sensitive company announcements or qualitative material. Simply Wall St has no position in any stocks mentioned.

Join A Paid User Research Session
You’ll receive a US$30 Amazon Gift card for 1 hour of your time while helping us build better investing tools for the individual investors like yourself. Sign up here

Mon, 11 Jul 2022 08:04:00 -0500 en-US text/html https://finance.yahoo.com/news/cisco-systems-inc-nasdaq-csco-194736548.html
Killexams : CEO Arrested for Selling $1 Billion in Fake Cisco Hardware on Amazon, eBay

A Miami-based CEO has been arrested for allegedly importing $1 billion worth of counterfeit Cisco equipment from China and then selling it on Amazon and eBay.

The Justice Department announced(Opens in a new window) today that it had indicted 38-year-old Onur “Ron” Aksoy for selling the counterfeit Cisco gear via numerous online storefronts. 

Allegedly, Aksoy imported tens of thousands of fraudulent Cisco devices from China and Hong Kong. He then created at least 19 companies in New Jersey and Florida, dubbed the “Pro Network,” to help him resell the hardware as genuine through the e-commerce sites. 

Pro Network website

One of the sites Aksoy seems to be using to sell the Cisco gear.

“The operation allegedly generated over $100 million in revenue, and Aksoy received millions of dollars for his personal gain,” the Justice Department said. 

The Cisco equipment Aksoy allegedly sold was usually older, lower-end models that were previously bought or discarded. Counterfeiters in China then modified the equipment, making the devices appear as if they were newer or more expensive Cisco product models. 

“As alleged, the Chinese counterfeiters often added pirated Cisco software and unauthorized, low-quality, or unreliable components—including components to circumvent technological measures added by Cisco to the software to check for software license compliance and to authenticate the hardware,” the Justice Department said. In addition, the counterfeit products were packaged with authentic-looking labels, boxes, and documentation. 

However, customers who bought the equipment would later realize the products were defective. “Often, they would simply fail or otherwise malfunction, causing significant damage to their users’ networks and operations—in some cases, costing users tens of thousands of dollars,” the Justice Department said. “Customers of Aksoy’s fraudulent and counterfeit devices included hospitals, schools, government agencies, and the military.”

According to the US’s criminal complaint(Opens in a new window), Aksoy dates back to at least 2013. He was able to buy the counterfeit equipment at “95 to 98%” lower than the prices of genuine Cisco products. 

The counterfeiting generated numerous complaints from buyers on Amazon and eBay. In response, Amazon and eBay suspended(Opens in a new window) or terminated the storefronts on their sites. But Aksoy repeatedly returned to the e-commerce platforms, creating new storefronts under different names between 2014 and 2020. 

Amazon storefronts

Cisco was also aware the counterfeit scheme was going on. From 2014 to 2019, the company sent seven cease-and-desist letters to Aksoy, demanding he end the counterfeiting scam. 

Recommended by Our Editors

At the same time, US Customs and Border Protection seized about 180 shipments the Chinese counterfeiters tried to send to Aksoy over the past nine years. In July 2021, US agents also executed a search warrant and raided an Aksoy-operated warehouse, seizing 1,156 counterfeit Cisco devices with a retail value of over $7 million.

To evade investigation, Aksoy would sometimes use the alias Dave Durden. But last week, federal investigators arrested Aksoy in Miami on several fraud-related counts. As evidence, the criminal complaint against him cites numerous emails and messages Aksoy and his associates sent to counterfeit suppliers in China. 

The Justice Department cataloged(Opens in a new window) the various storefronts Aksoy used on Amazon, eBay, and on his own websites to sell the goods. But at the moment, it remains unclear if victims will receive any restitution. Aksoy's company Pro Network did not immediately respond to a request for comment.

In a statement, Cisco said: "We are committed to maintaining the integrity and quality of Cisco products and services. Cisco is grateful to law enforcement and customs officials for their tremendous collaboration in this investigation and to the DOJ for bringing the perpetrator to justice."

Like What You're Reading?

Sign up for SecurityWatch newsletter for our top privacy and security stories delivered right to your inbox.

This newsletter may contain advertising, deals, or affiliate links. Subscribing to a newsletter indicates your consent to our Terms of Use and Privacy Policy. You may unsubscribe from the newsletters at any time.

Fri, 08 Jul 2022 08:23:00 -0500 en text/html https://www.pcmag.com/news/ceo-arrested-for-selling-1-billion-in-fake-cisco-hardware-on-amazon-ebay
Killexams : Cisco vision of network automation focused on visibility, intelligent data insights, and action

Editor’s note: For the first installment in this two-part series, click here to read, “Cisco on Routed Optical Networking: The efficiency of it all (Part 1)”

5G is maturing but new service revenues remain elusive; operators have something of a tough road to hoe. As they try to figure out the new revenue piece–something that will certainly flow from delivering solutions to enterprises rather than selling more of [insert thing they could sell more of] to consumers–a secondary (primary maybe) goal is removing structural operational costs and automating whatever can be automated. 

To the removal of structural costs, see the link to Part 1 of this story in the subheading. As for the automation of it all, we turn to an interview conducted on the sidelines of Cisco Live with Kevin Wollenweber, vice president of product management for Cisco’s Service Provider Network Systems business. One of the recurring themes of our conversation was how do operators–by and large risk-averse, bloated organizations seemingly unaware that their own corporate inertia is a primary culprit for stagnant ARPUs (my words, not his)–figure out what amount of automation is the correct amount of automation. 

“The word automation means something different to everyone,” he said. “When we started down the path of automation, it was more about simple automation of tasks: I used to type these seven commands, now I write a script that automates the writing of those seven commands. What we’re really seeing now is the era of more automating intent, and delivering full use cases through automation. In terms of automation, I’m definitely seeing a shift of the [service] providers away from just task-based automation. They want to simplify how they use multiple tools and multiple technologies and deliver on these end use cases like what we’re doing with Routed Optical, or as they roll out Kubernetes infrastructure.” 

When he’s talking through it with potential or existing customers, Wollenweber said he likes to boil things down to three primary tenets: 

  • Visibility: “How do I understand what’s happening in the network [using] tools that can work across multiple vendors and multiple domains in the network? Show them what’s happening and help them understand it.”
  • Intelligent data insights: “Using streaming telemetry to drive insights around what’s happening in the network—take all the data and gain intelligent insights.” Of note, this doesn’t necessarily have to be based on artificial intelligence and machine learning. 
  • Action: “The next step is click this button and do it…We trust it now. I do see some hesitance in the full closed-loop [automation] from some large service providers.” 

Wollenweber, pulling out another recurring theme from the larger Cisco Live program, pointed out that the technology isn’t really the hard part here. The bigger lift is assembling an organization in a manner that lets the technology do what’s is supposed to do which is drive operational savings. This is particularly important if you look at the vision of 5G network slicing wherein its most functional form a customer could enter network performance requirements into a portal and the operator’s network would provision and deliver those features automatically and end-to-end. 

The friction is around the sheer complexity of the networks operators have built. There’s also something of a disconnect around the idea that in order to get to an end state (if there ever is an end state) of automated, intelligent, almost elegant, networks, things will probably have to get more complex before they get less complex. 

“I would say a lot of the components and underlying building blocks, we’re delivering that today,” he said. “I think we see there’s going to be a lot of revenue that comes in from enterprises and private networks. The analogy I like to use a lot with what we’re doing with Routed Optical and a lot of these tools, think about Tesla and self-driving cars and what’s happening in that space. The goal isn’t to transform a car; it’s to transform the transportation industry. That’s what we’re trying to do with networks. I live in [network] transport. For me, you can’t build a house without a foundation. You can’t build a next-gen communications infrastructure without transport. What we’re really trying to do is transform the service provider infrastructure, drive that cost and efficiency moving forward.” 

Thu, 07 Jul 2022 04:35:00 -0500 en-US text/html https://www.rcrwireless.com/20220707/network-infrastructure/cisco-on-routed-optical-networking-the-automation-of-it-all-part-2-2
352-001 exam dump and training guide direct download
Training Exams List